Close

E-Disk® Altima™ II M.2 SATA SSD I-Series

Industrial

E-Disk Altima II M.2 SSD I-Series comes in a small form factor, with very low power consumption, and high capacity. AES-256 Encryption and TCG Opal security features ensure E-Disk Altima II M.2 SSD is protected from unauthorized access.

Shock, vibration, temperature, humidity resistance, and fast boot/shutdown capabilities address the needs of industrial requirements and applications. The maximum bandwidth of the E-Disk Altima II M.2 SATA SSD I-Series is up to 560 MB/s with a capacity range of up to 2TB.

Advanced features provide longevity to reliably retain data for extended periods of time. State-of-the art global wear leveling, sophisticated hardware LDPC ECC engine, and over-provisioning technologies extend the usable life of E-Disk Altima II M.2 SATA SSD I-Series.

  • Low Power Consumption
  • Small Form Factor
  • AES 256 Encryption Support (Optional)
  • TCG Opal Compliant (Optional)
  • Power On Data Erase
  • Crypto Erase (Optional)
  • HW Write Protect (Optional)
  • HW Instant Erase (Optional)
  • TRIM and SMART Monitoring & Reporting
Form Factor
M.2 2280
NAND Support
SLC, pSLC, MLC, pMLC, 3D TLC
Capacity
Up to 2TB depending on NAND type required
Performance
Sequential Read: Up to 560 Mb/s
Sequential Write: Up to 530 Mb/s
Security & Encryption
Power on Data Erase
TCG Opal 2.0 Compliance (Optional)
AES-256 Encryption (Optional)
Crypto Erase (Optional)
HW Write Protect (Optional)
HW Instant Erase (Optional)
Operating Temperature
-40 to 85 ºC
Operating Humidity
5 to 95% RH
Operating Shock
1,500 G
Operating Vibration
20 Grms
Warranty
Standard: 1 year
Extended (Optional): 3 years
For all inquiries including, Sales Inquiries, please contact or call us:

Sales & General Inquiries:

+1 888-72-FLASH

Costumer & Technical Support:

+1 888-723-0123

Note: Standard and optional features may change and not all combination of features are implemented. The information stated in these product pages are thus informational only. To ensure that BiTMICRO meets your requirements, please contact us so that we can properly assist you.